1. Which walls are often used for outdoor lighting lamps: 1. The wall has a concave and convex feeling: modeling wall, cultural brick, etc. 2. The wall is relatively flat: the outer wall of the residential building, 3. The wall reflection: mirror wall, wall There are reflective materials, smooth marble walls, etc. 4. Translucent wall: glass surface
2. Wall color distinction of outdoor lighting lamps installation: 1. Dark color: black, with strong light absorption 2. Light color: beige, light gray, etc. 3. White wall

3. The light effect of different walls is different: 1. The light effect of the wall with a concave and convex feeling obviously does not have high requirements for lamps. 2. The light effect of the flat wall is also more obvious. Pay attention to the height that needs to be illuminated. 3. Reflective walls and translucent walls are not suitable for lighting, but are suitable for contour effects.
Fourth, the color of the wall where the building lighting fixtures are installed is more particular about the color temperature: 1. The dark wall needs to choose the golden light with a low color temperature like 2000K down, or the blue light, red light, etc., because of its light absorption characteristics. color is easier to produce effect. 2. Light-colored walls do not have very high requirements on color temperature, and can be matched according to customer preferences. 3. The power requirements of the white wall to the lamps are not too high, and it is easier to produce the effect. Commonly used to golden light, warm white light and so on. Requirements for the power of lamps and lanterns on different walls
In particular, let’s talk about the difference between dark and light-colored walls. The power required to light a dark-colored wall of the same height is nearly twice that of a light-colored wall. For example, suppose that 18W wall washer is needed to light a two-meter-high light-colored wall, and a 36W wall washer may be required for dark walls to produce the effect. Have you learned the above knowledge points? I hope it will be helpful to everyone. ,,