Home
Products
About Us
Cases
News
Support
Contact us
Home  >  News  >  Industry news

Reasons and Solutions for LED Lamp Beads Not Lighting

time:Apr 08, 2022 Views:



1. Problems caused by abnormal power supply


  1. Check whether the power supply is working normally, and whether the indicator light is on. If not, please check whether the power supply is connected well.


  2. Check whether the power cord of the lamp bead is well connected with the positive and negative poles of the power supply, and whether it is reversed. If the above problems exist, please connect them correctly.

Reasons and Solutions for LED Lamp Beads Not Lighting(图1)

Second, the problem caused by abnormal signal transmission


  1. Check whether the power cord of the required power cord of the controller is properly connected to the power supply.


2. Whether the control card with the program is in good contact with the controller, and whether the signal line of the lamp bead is connected to the signal output of the controller.


4 LED lamp bead light decay test


First of all, the manufacturer of LED lamp beads should have data on the life and light decay of the lamp beads, and Maxspect should be able to obtain these data. Although the actual lamp usage factors such as temperature, humidity and voltage have an impact on the actual life and light decay performance of the lamp bead, the data of the packaging factory of the LED lamp bead is still of great reference value.


I don't know if MaxSpect plans to do some verification of reliability, lamp life and light decay parameters. The basic principle is to design a series of accelerated aging experiments, find some factors that can accelerate the aging of the lamp beads, such as high voltage and high temperature, and artificially manipulate these factors to accelerate the aging of the lamp beads, so that it can be used in a relatively short time (a few days to a few weeks). ) to simulate actual usage over several years.


I have seen the test data of Aqua Illumination on reefcentral.com, whether it is accurate or not, such data at least improves the persuasiveness of the product.


Several major seawater forums in North America have mentioned MaxSpect products. Once someone mentioned Made in China, everyone shook their heads. I am very unconvinced by this. The price of the equivalent sets of similar quality produced in North America is basically several times that of MaxSpect; in terms of control, MaxSpect's G2 also has basic timing functions; in contrast, the controller of Auqa Illumination's lamp set There are some advanced features like simulating sunrise, sunset and moon phases, but they cost a few hundred dollars more. If MaxSpect can go a step further in R&D, appearance and quality control, it will be able to beat those European and American brands.


What is the reason for the yellowing of LED lamp beads? Back to list What are the characteristics of LED lamp beads?