High pole lamp manufacturers have learned that there are basically two kinds of high pole lamps common in our daily life: one is a 360 degree circle. One is a 180 degree semicircle.

The common configuration parameters of these high pole lamps produced by high pole lamp manufacturers are:

1. The high pole lamp pole produced by the high pole lamp manufacturer is octagonal, dodecagon, octagonal pyramid pole, which is made of high strength and quality steel plate by shearing, bending and automatic welding. The general height is 25m, 30m, 35m, 40m, the design wind resistance can reach 60m/ s. Each specification consists of 3 to 4 connectors. Flange steel chassis 1 m to 1.2 m in diameter and 30 mm thick.

2. The main function is frame structure, and the main decoration is steel pipe and high pole lamp steel pipe. The lamp pole and lamp plate are treated with hot dip zinc.

3. The electric lifting system is composed of high bar lamp motor, high bar lamp hoist, three groups of hot-dip galvanized steel wire rope and high bar lamp cable, etc. Mounted in the body of the lamp, the vertical speed is 3 to 5 meters per minute.

4. The guide unloading system is composed of guide wheel and guide arm to ensure that the light board will not move laterally in the process of lifting, and the light board can fall off automatically and be locked by hooks after rising to the position.

5. Lighting electrical system is equipped with 6 ~ 24 400W~1000W floodlights (metal halide lamp [white light]) and floodlights (metal halide lamp [white light]), computer time controller can automatically control the switching time, partial lighting or full lighting.

6. Lightning protection system: 1.5-meter-long lightning rod shall be installed on the top of the lamp, and 1-meter-long grounding wire shall be installed on the underground foundation, which shall be welded with underground bolts.